The Use of a ß-lactamase-based Conductimetric Biosensor Assay to Detect Biomolecular Interactions.

Biosensors are becoming increasingly important and implemented in various fields such as pathogen detection, molecular diagnosis, environmental monitoring, and food safety control. In this context, we used ß-lactamases as efficient reporter enzymes in several protein-protein interaction studies. Furthermore, their ability to accept insertions of peptides or structured proteins/domains strongly encourages the use of these enzymes to generate chimeric proteins. In a recent study, we inserted a single-domain antibody fragment into the Bacillus licheniformis BlaP ß-lactamase. These small domains, also called nanobodies, are defined as the antigen-binding domains of single chain antibodies from camelids. Like common double chain antibodies, they show high affinities and specificities for their targets. The resulting chimeric protein exhibited a high affinity against its target while retaining the ß-lactamase activity. This suggests that the nanobody and ß-lactamase moieties remain functional. In the present work, we report a detailed protocol that combines our hybrid ß-lactamase system to the biosensor technology. The specific binding of the nanobody to its target can be detected thanks to a conductimetric measurement of the protons released by the catalytic activity of the enzyme.

Multicentre evaluation of the BYG Carba v2.0 test, a simplified electrochemical assay for the rapid laboratory detection of carbapenemase-producing Enterobacteriaceae.

Rapid detection of carbapenemase-producing Enterobacteriaceae (CPE) represents a major challenge for microbiology laboratories. We evaluated the BYG Carba v2.0 using a simplified protocol, which detects CPE in less than 30 minutes. This new procedure reduces the hands-on-time from 5 to one minute and only requires a limited amount of material (one to three colonies) thereby preventing the need for subculturing bacterial isolates to reach a larger amount of pure biomass. This multicentre study involved four European reference laboratories. For the 1181 isolates tested across four centres, BYG Carba v2.0 yielded overall sensitivity and specificity of 96.3% (CI95: 94.5-97.5) and 99.7% (CI95: 98.6-100) respectively. Considering only the 670 consecutive isolates tested prospectively, the BYG Carba v2.0 displayed overall positive and negative predictive values of 99.7% (CI95: 95.4-98.9) and 97.5% (CI95: 94.9-98.8). Regarding time to positivity, 85% of CPE detected were positive within ten minutes. The BYG Carba v2.0 is a new highly simplified, rapid and accurate electrochemical assay discriminating between CPE and non-CPE in less than 30 min. The real-time quantified signal allows objective and traceable interpretation of the results.

Comparative Evaluation of Four Phenotypic Tests for Detection of Carbapenemase-Producing Gram-Negative Bacteria.

Four screening assays aimed for rapid detection of carbapenemase production from Gram-negative bacterial isolates, i.e., the Neo-Rapid Carb kit (Rosco Diagnostica A/S), the Rapidec Carba NP test (bioMérieux SA), the ß Carba test (Bio-Rad Laboratories N.V.), and a homemade electrochemical assay (BYG Carba test) were evaluated against a panel comprising 328 clinical isolates (Enterobacteriaceae [n = 198] and nonfermentative Gram-negative bacilli [n = 130]) with previously characterized resistance mechanisms to carbapenems. Among Enterobacteriaceae isolates, the BYG Carba test and the ß Carba test showed excellent sensitivities (respectively, 100% and 97.3%) and specificities (respectively, 98.9% and 97.7%). The two other assays yielded poorer performances with sensitivity and specificity of 91.9% and 83.9% for the Rapidec Carba NP test and of 89.2% and 89.7% for the Neo-Rapid Carb kit, respectively. Among Pseudomonas spp., sensitivities and specificities ranged, respectively, from 87.3% to 92.7% and from 88.2% to 94.1%. Finally, all tests performed poorly against Acinetobacter spp., with sensitivities and specificities, respectively, ranging from 27.3% to 75.8% and from 75 to 100%. Among commercially available assays, the ß Carba test appeared to be the most convenient for routine use and showed the best overall performances, especially against OXA-48-like producers. The excellent performance of the BYG Carba test against Enterobacteriaceae was confirmed (100% sensitivity and 98.9% specificity).

Evaluation of the BYG Carba Test, a New Electrochemical Assay for Rapid Laboratory Detection of Carbapenemase-Producing Enterobacteriaceae.

Accurate detection of carbapenemase-producing Enterobacteriaceae (CPE) constitutes a major laboratory diagnostic challenge. We evaluated an electrochemical technique (the BYG Carba test) which allows detection of CPE in less than 35 min. The BYG Carba test was first validated in triplicate against 57 collection isolates with previously characterized ß-lactam resistance mechanisms (OXA-48, n = 12; KPC, n = 8; NDM, n = 8; VIM, n = 8; IMP, n = 3; GIM, n = 1; GES-6, n = 1; no carbapenemase, n = 16) and against a panel of 10 isolates obtained from the United Kingdom National External Quality Assessment Service (NEQAS). The test was then evaluated prospectively against 324 isolates referred to the national reference center for suspicion of CPE. The BYG Carba test results were compared with those obtained with the Carba NP test using multiplex PCR sequencing as the gold standard. Of the 57 collection and the 10 NEQAS isolates, all but one GES-6-producing isolate were correctly identified by the Carba BYG test. Among the 324 consecutive Enterobacteriaceae isolates tested prospectively, 146 were confirmed as noncarbapenemase producers by PCR while 178 harbored a carbapenemase gene (OXA-48, n = 117; KPC, n = 25; NDM, n = 23; and VIM, n = 13). Prospectively, in comparison with PCR results, the BYG Carba test displayed 95% sensitivity and 100% specificity versus 89% and 100%, respectively, for the Carba NP test. The BYG Carba test is a novel, rapid, and efficient assay based on an electro-active polymer biosensing technology discriminating between CPE and non-CPE. The precise electrochemical signal (electrochemical impedance variations) allows the establishment of real-time objective measurement and interpretation criteria which should facilitate the accreditation process of this technology.

Comparison of the density of proteins and peptides grafted on silane layers and polyelectrolyte multilayers.

Immobilized proteins or peptides are of critical importance for applications such as biosensing or cell culture. We analyze the structure of layers of a large variety of proteins and peptides, grafted on silicon substrates by different routes differing in the nature of the intermediate layer linking the biomolecules to the substrate, either a silane monolayer, or a polyelectrolyte multilayer made from synthetic or natural polymers. The structural analysis is essentially performed by X-ray reflectometry, which proves to be an efficient methodology not requiring the use of tagged biomolecules, capable of evaluating consistently the amount of grafted biomolecules per surface area with estimated precisions ranging from 10 to 20%. The study provides a quantitative basis for selecting one among a series of well-proofed and sturdy grafting methodologies and underlines the potential of XRR for assessing the amount of grafted biomacromolecules without requiring the expensive tagging of molecules. Our results also show that, for the coupling route resting on synthetic polyelectrolytes, the grafting density is significantly lower than for direct coupling over a silane layer. In contrast, when performed over a cushion based on polysaccharides, the grafting density is well above the values found for a dense layer grafted on a silane monolayer, indicating partial penetration and swelling of the polysaccharide cushion.

High-resolution imaging of chemical and biological sites on living cells using peak force tapping atomic force microscopy.

Currently, there is a growing need for methods that can quantify and map the molecular interactions of biological samples, both with high-force sensitivity and high spatial resolution. Force-volume imaging is a valuable atomic force microscopy (AFM) modality for probing specific sites on biosurfaces. However, the low speed and poor spatial resolution of this method have severely hampered its widespread use in life science research. We use a novel AFM mode (i.e., peak force tapping with chemically functionalized tips) to probe the localization and interactions of chemical and biological sites on living cells at high speed and high resolution (8 min for 1 µm × 1 µm images at 512 pixels × 512 pixels). First, we demonstrate the ability of the method to quantify and image hydrophobic forces on organic surfaces and on microbial pathogens. Next, we detect single sensor proteins on yeast cells, and we unravel their mechanical properties in relation to cellular function. Owing to its key capabilities (quantitative mapping, resolution of a few nanometers, and true correlation with topography), this novel biochemically sensitive imaging technique is a powerful complement to other advanced AFM modes for quantitative, high-resolution bioimaging.

Urea potentiometric enzymatic biosensor based on charged biopolymers and electrodeposited polyaniline.

A potentiometric biosensor based on urease was developed for the quantitative determination of urea concentration in aqueous solutions for biomedical applications. The urease was either physisorbed onto an electrodeposited polyaniline film (PANI), or immobilized on a layer-by-layer film (LbL) assembled over the PANI film, that was obtained by the alternate deposition of charged polysaccharides (carboxymethylpullulan (CMP) and chitosan (CHI)). In the latter case, the urease (Urs) enzyme was either physically adsorbed or covalently grafted to the LbL film using carbodiimide coupling reaction. Potentiometric responses of the enzymatic biosensors were measured as a function of the urea concentration in aqueous solutions (from 10(-6) to 10(-1) mol L(-1) urea). Very high sensitivity and short response time were observed for the present biosensor. Moreover, a stability study showed a higher stability over time for the potentiometric response of the sensor with the enzyme-grafted LbL film, testifying for the protective nature of the polysaccharide coating and the interest of covalent grafting.

Thickness and elastic modulus of plasma treated PDMS silica-like surface layer.

The adhesion of poly(dimethylsiloxane) (PDMS) rubber is largely improved by oxygen plasma surface treatment. The thickness of the silica-like surface layer is characterized by performing transmission electron microscopy imagery on microtome slices of welded plasma treated surfaces. The specific double layer contrast can be considered as equal to twice the thickness of the silica-like layer. The thickness measurements combined with strain-induced elastic buckling instability analysis gives an estimate of the elastic modulus of the silica-like layer equal to 1.5 GPa.

Nanophase separation in polystyrene-polyfluorene block copolymers thin films prepared through the breath figure procedure.

The amphiphilic block copolymer formed by a hydrophobic body of polystyrene and a hydrophilic head of poly[9,9-di(2-(2-tetrahydropyranyl-oxy)hexyl)fluorene-alt-9,9-dioctylfluorene] was synthesized, and its solution was used to create thin films with ordered pattern of holes, by means of the breath figure technique. These porous films, after a thermal treatment, were found to show ordered aggregates of the pi-conjugated blocks in the place of the cavities. This is probably due to a preorganization of the two different blocks of the copolymer occurring during the breath figure formation, which is driven by the condensation of water microdroplets on the polymer solution, and to a following phase segregation occurring during the thermal annealing. This approach is a promising tool to be employed for the organization of organic materials at the micro and nanoscale.

Controlled aniline polymerization strategies for polyaniline micro- and nano self-assembling into practical electronic devices.

Electroless polymerization of aniline on platinum is investigated for polyaniline micro- and nanostructuring into practical electronic devices. This type of reaction is adapted to estimate its usefulness in a lithographic process. For practical electronic device fabrication, electroless polymerization of aniline can be used to electrically bridge initially independent platinum electrodes. As this application requires a polyaniline bridge to form over a nonconductive material before an electrical contact is obtained, polyaniline growth using chemical oxidative reaction is investigated on substrates presenting surface-tension contrast patterns.